Models > ZIC360NHDRH > Instructions

ZIC360NHDRH General Electric - Instructions

Jump to:

All Instructions for the ZIC360NHDRH
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Sherrie from Boone, NC
Parts Used:
WR78X20985
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Wasn't cold enough.
Removed the gasket and put the other one on. Just pushed in the groove and it was on. Works great.
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
parviz from LAGUNA NIGUEL, CA
Parts Used:
WR78X20985
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Ice in freezer around the seal and water dripping from freezer door.
Shut off the refrigerator and remove the two baskets in the freezer remove freezer compartment door .
I payed the door on a table this made impossible for easier
Replacement of the new seal . Especially because of the age of the refrigerator.
There was no problem reinstalling the door.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from hilton Head Island, SC
Parts Used:
WR71X10140, WR71X10139, WR32X10119
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
cracked items
replaced with new
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ZIC360NHDRH
1 - 3 of 3