Models > QDT125SSK0SS > Instructions

QDT125SSK0SS General Electric - Instructions

Jump to:

All Instructions for the QDT125SSK0SS
1 - 15 of 19
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Greg from Doon, IA
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
cap was melted
replaced it
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pauline from Oceanside, CA
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Silverware basket had holes in it.
Took old one out and replaced new one in less than one minute.

Very easy and easy to order also.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jerome from Arlington, VA
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lost Rinse Aid cap
Inserted new cap purchased from PartSelect.
7 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Denvr, CO
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Dispenser Cap Missing
Ordered new cap and put it on when it arrived.
Simple
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from Gregory, MI
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bottom of basket deteriorated
Remove old basket, discard, place new basket in dishwasher, fill with dirty silverware, run wash cycle.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jean from White Plains, NY
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing cap
I placed the missing cap into the dispenser.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alice from BLAINE, MN
Parts Used:
WD12X10122
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
cap had melted mi
Unscrew the old one and screw in the new one.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from Los Osos, CA
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
holes in dishwasher silverware basket
removed old basket, put new one in
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from ANN ARBOR, MI
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The basket handle was broken in transit.
I ordered the silverware basket because the original started to separate. The shipment box was damaged and sure enough the handle was broken. The handle can be removed so I replaced the new handle with the old handle, since it was the basket that really needed. Pops off very easily.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Inge from ANAHEIM, CA
Parts Used:
WD12X10230, WD12X10222
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
broken upper roller
Turn water and electric off. remove\ dishwasher

take of old roller mount and replace new part

















0
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sophie from HOLYOKE, MA
Parts Used:
WD12X10286
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replaced the micro filter
Just tool out the old micro filter and put in the new filter.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vivian from RAMSEY, NJ
Parts Used:
WD24X10048, WD01X10322
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Leaking drain hose
Removed leaking drain hose under the dishwasher from drain pump and sink drain pipe. Fed new hose behind dw connected with new clamps to dw drain pump and sink drain pipe. Put in high loop under sink.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CAROL from BUFFALO, NY
Parts Used:
WD28X10215
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed new silverware basket
took out the old basket and put in the new basket
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Gwinner, WI
Parts Used:
WD12X10221
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Roller wheels wore out.
manual labor.. And a little help from Milwaukee power tools.
4 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martha from Kingman, AZ
Parts Used:
WD12X10122
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Rinse Dispenser Cap melted on heating coil
Opened dishwasher after it completed a wash cycle. Found the rinse dispenser cap had come off during the wash and melted on the heating coil at the bottom of the machine. Pulled cap off of coil, made sure coil was not disturbed. Looked in various sites for cap. Finally found this site where I didn't need to order the whole mechanism and could order just the cap. Received the cap, screwed into the dispenser, fixed. The only problem I had was that there were two possible caps so I picked the one that was the same color as the original one. Project completed. Thanks
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the QDT125SSK0SS
1 - 15 of 19