Models > ZIF360NXALH > Instructions

ZIF360NXALH General Electric Freezer - Instructions

Jump to:

All Instructions for the ZIF360NXALH
76 - 89 of 89
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dan from Seattle, WA
Parts Used:
WR60X30922
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
broken fan blade
about an hour to figure out what was causing the vibration and noise and about an hour to put it back together and 5 min. to order a new fan blade thank you.It started making noise during thanksgiving dinner so we toke it apart after dinner and I cut the other 2 blade to match the broken one so to cut down on the noise and vibration semi put it back together and 7 days later the part arrived.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Pittsburgh, PA
Parts Used:
WR57X10024
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Internittant water dispensing
Replaced secondary inlet valve. Replacing the valve is repetitively simple, just cut the water tubes from the existing valve and insert into the new valve. Hard part is pulling the built-in fridge out of the cabinet space.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ZIF360NXALH
76 - 89 of 89