Models
>
FCM7WMNBWW
FCM7WMNBWW General Electric Freezer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FCM7WMNBWW
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$51.43
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
In Stock
Order now and your part arrives by Aug 30
Special Order
Common Problems and Symptoms for FCM7WMNBWW
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- H.K. from Seagoville, TX
- Parts Used:
- WR55X24065
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
compressor not starting
Refrigerator is not cooling. Light and fan working. Changed the capacitor.. Still not cooling. Back to discovery mode.It may be the timer
Certainly not PartSelect's fault. They have great service.
Certainly not PartSelect's fault. They have great service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- scott from Painesville, OH
- Parts Used:
- WR09X10089
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Freezer ran constantly
removed 2 phillips screws for side panel and one for cold control faceplate. Pulled control away from chassis, disconnected wires with pliers, pulled out long sensor wire going into freezer. Installed new part in reverse order. Works like a charm, should save energy and money.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Normand from Warren, MI
- Parts Used:
- WR13X10264, WR13X10263, WR02X11341
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Needed to create a 10" Keezer collar for chest freezer.
Cut 1'x10'x10" select pine board into 4 pieces. Attached the four pieces using the Kreg Jig Jr to each other. Stained and polyurethane for appearance. Added EDM weather strip to bottom edge of collar. Disconnected hinges and removed lid from freezer chest. Placed collar on top of chest freezer then placed lid on top of collar. Carefully a
... Read more
ligned collar to freezer and lid to collar. Attached existing hinge of lid to collar, then mounted new hinges to existing freezer mount location then attached new hinges to collar. Double hinged collar. Nice!!!! Not a repair but an improvement.
Read less
Was this instruction helpful to you?
Thank you for voting!