ZIR361NPRDII General Electric Freezer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Des Plaines, IL
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Wrench set
Water flowing from ice maker
PartSelect helped me identify the part, got it in only a few days and I followed the easy to follow video featuring Steve. Awesome!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Holland, OH
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Nurse fixes Refrigerator Water leak back of Fridge
1. Turned off water near hot water tank 2. Removed back (small section) of the refrigerator, only 7-8 screws. 3. Disconnected the old water hose (comes out easily. 4. Reconnected new water valve 5. Turned on water @ hot water tank 6. Replaced back of refrigerator. All done! I have never done anything like this, and I had no instructions, very easy to figure out. The part cost $48 here.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from McKinney, TX
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Water would not come out of front of refrig. I maker worked fine.
Removed back panel. Cut the water lines and replaced the double outlet water valve. The only issue was the long period of time until the water flowed from the outlet. Be prepared to wait, it will take some time for the water to flow.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- michael from west bend, WI
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Unit would make ice, but would not dispense water
Simple repair. I first shut off the water supply to the unit. I then removed back cover from lower part of the unit. The water valve is on the lower left side. I began by removing the screw on the bracket that holds the part in place. This screws into the back of the unit. I then disconnect the water line by unscrewing the fitting. Then unplugged the two electrical connections in the back of the unit. Lastly, remove the two hoses that plug into the bottom of the the unit. The installation was essentially the reverse of the the removal. The whole process took about ten minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carl from Fremont, CA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
Water leaking from Water Solenoid
I went on Google to get GE Tech Manual. But really, undid screws for back plate; Dismounted (1 screw) Water Solenoid assembly; disconnected 3 water hoses into solenoid; unplug two power connectors. Then reversed the process with new Water Solenoid...works great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alyce from Milliken, CO
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
The water valve developed a leak.
Removed back lower panel, removed valve, ordered part on internet, cleaned motor and back of fridge. Most time spent was waiting for delivery of ordered part. Part received and installed in 15 minutes after reviewing instructional video included in my email verifying my order, fridge pushed back into place, waited for ice maker to refill.....DONE. So easy. Thanks guys. Job well done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from hubertus, WI
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Water constantly leaking from dispenser.
Instructions are excellent - no modifications. The problem was with determining what was causing the leak. GE, in telephone conversations, kept telling us to run several gallons of water through the system to remedy the problem, and suggesting we change the water filter (MWF). We discovered the remedy by looking through your listing of replacement water parts, till we found the commentary dealing with our problem. This is the second problem with the refrigerator solved by searching your catalogue and reviewing your demos. I'm afraid you have a customer for life (at least for the life of our GE appliances).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Teresa from Queensbury, NY
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
Water intake to ice maker kept freezing due to slow leak in valve.
The process would have been fairly intuitive, and the part is designed in such a way that it is impossible to hook anything up to the wrong connecting point. PartSelect's on-line video of the repair was clear and easy to follow -- the perfect primer to review before I started the job. The first part I received was defective, and although it functioned it leaked water onto the floor. This gave me the opportunity to engage PartSelect's unparalleled customer service department for friendly and incredibly prompt correction. I look forward to my next appliance failure just for the pleasure of doing business with this exceptional firm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from Rocky Mount, NC
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
No water, no ice
Removed the back bottom panel and removed the one screw holding the water valve on. Removed water connections and replaced with new valve. Ice was made in the first 10 min. However, drinking water was not available for 4 hours to the dispenser.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- michael from Tamarac, FL
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
no ice/water trough door
turn off fridge. disconnect water. take off back panal. disconnect hoses from blue and red part of hose and unscrew old valve. put new valve and reassemble. in case of leak DO CUT HOSE TO ATTEMPT BETTER FIT. learned that one the hard way. those hoses come with the filter holder and are sold as a part. u live, u learn. all better now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from kalamazoo, MI
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
The solenoid that opens and closes the door to the icemaker rusted.
I ordered a new solenoid. i took the old one out and put the new one in-- done-- and it works!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ATILLA from REDLANDS, CA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
Leaky water valve
Videos for installing the part is really very helpfull.It takes replacing arround less than 30 min. Thanks....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gerold from Edmonds, WA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Wrench set
No Water Coming Out Of The Water Despensorf
Very easy not difficult
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Billy from Noel, MO
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
No water from in door dispensor
I ordered the part, fast shipping, watched the video, great video, made the repair, customer happy. What a great experience for all of us. Bill
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sudheer from Plano, TX
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Water leak from the valve.
I just followed the instructions from the video attached to this order. Thanks to Parts Select for sending me the part on time and attaching a video showing installation.
Was this instruction helpful to you?
Thank you for voting!