KFP740QBW2 KitchenAid Food Processor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- BARBARA from RODNEY, MI
- Parts Used:
- WP8212044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
work bowl has interlock for power switch
The old one broke. I ordered a new one and put it on the food processor. Bingo! Back in business.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Laingsburg, MI
- Parts Used:
- WPW10281249
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Part
The part was shipped with LIGHTENING speed!! So pleased! The part was readily available and so easy to order!
Thank you! I'll be back!
Thank you! I'll be back!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from The Woodlands, TX
- Parts Used:
- WP8212044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Work Bowl on Food Processor broke
The site was easy to navigate. I quickly found the part that I needed to replace, ordered it, and it was here in just a few days and I was able to use my Kitchenaid Food processor again. I will definately use this site again for any appliance parts I need. Much less expensive than replacing small appliances!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from STANWOOD, MI
- Parts Used:
- WP8212044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Handle of old bowl fell apart disabling food processor
New bowl arrived. Matched model number as described. Put new bowl on base, slid it into position, safety switched engaged and food processor worked. Simple easy, quick.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debbie from BOONEVILLE, MS
- Parts Used:
- WP8212044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Just replacement, no repair
Just replacement for cracked bowl.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from GRIZZLY FLATS, CA
- Parts Used:
- WP8212044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
The bowl handle was broken
Bought a new bowl from PartSelect. It came practically overnight, placed it on the base and it works perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Plano, IL
- Parts Used:
- WP8212044
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The cheap plastic bowl and parts do not hold up to even limited use.
I needed to replace the entire bowl. There was no repair.
Was this instruction helpful to you?
Thank you for voting!
Warped Sleeve & broken blade
I used 3, 3/4" x 2" x 4" blocks of wood (to protect the motor housing) and a carpenters 6" pry bar to remove the broken blade and the shaft sleeve from the shaft; 1st one side then the other side until the damaged sleeve was off. Cleaned the shaft with steel wool , vacuumed out the steel wool and applied a coating of light oil on the shaft. Using a rubber mallet I gently tapped the sleeve in to place. The new blade then just dropped into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Helen from Westmoreland, NY
- Parts Used:
- W10159633
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The work bowl broke
I put the new work bowl on the machine
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jennifer from Las Vegas, NV
- Parts Used:
- WP8212044
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The handle to my work bowl broke
I ordered a replacement work bowl and now my food processor works again!
Was this instruction helpful to you?
Thank you for voting!