Models
>
986501
986501 (000101) Ariens Edger
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 986501
Viewing 4 of 4Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
Special Order
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jimmy from Dickinson, TX
- Parts Used:
- 03789800
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench set
9" EDGER BLADE HAS WORN DOWN TO ABOUT 8"
Start by disconnecting spark plug wire. Using a 3/4" boxed end wrench to back up the edger blade shaft on the side opposite the blade, use a 1/2" ratchet with a 3/4" socket to remove the nut holding the blade on. It should be tight, and comes off by turning to the left. May need a small piece of 2 X 4 to go between the end of box wrenc
... Read more
h and your driveway to lock in place. Remove old blade and install new. As there is not a slot or key to hold the blade in place, tighten nut as tight as you can in order to hold the blade on the shaft. Replace spark plug wire and job is complete.
Read less
Was this instruction helpful to you?
Thank you for voting!