3RAWZ481ETH0 Whirlpool Dryer - Parts

This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.

This genuine OEM part is a screen door grille for your dryer. This piece serves as the top cover for the lint filter. If the grille has become cracked or damaged, clothing may become snagged, or marks...

With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenh...

This white female door catch is attached to the dryer door.

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

This kit comes with 2 adhesive pads, 2 brackets and 4 screws. This is for stacking the appliances vertically - dryer over washer.

This shaft is for the front with right hand thread. Sold individually.

This part seals between the blower housing and the blower housing cover.

This part is located on the drum roller support shaft.

This part is an electrical connector where you can attach wires. This part does NOT included the wires, screws, and nuts. Must be order separately