7MMGDC300DW2 Whirlpool Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Arlene from BOYNTON BEACH, FL
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
handle broke off
followed simple directions and it took 1 minute! Lime up with the hole and gently push, it clipped in immediately! You are a great place to go to for repairs!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from WASHOUGAL, WA
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken handle
removed and replaced door handle no tools required
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Jane from WESTHOFF, TX
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
plastic handle broke
Replacement handle snapped right back in place. Took about 2 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Leo, IN
- Parts Used:
- WPW10185992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Timer would not advance from set time.
Consulted Parts Select site for timer. Unplugged dryer piwer. Removed 6 screws from top console back, then timer itself by removing 2 screws. Moved electrical connections from old to new timer. Reinstalled timer screws and then console back screws. Plugged it in and all was good!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Geri from COUNTRYSIDE, IL
- Parts Used:
- W11050897
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
was not heating
remove back of dryer and install part same as old part was installed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from NEOSHO, MO
- Parts Used:
- W10861521
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Bad door gasket
Removed old seal and replaced with new one. Save yourself time and get some acetone to remove old glue works great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Sweet Water, AL
- Parts Used:
- WPW10185992
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Timer Stem broke
Turned power off. Removed panel. Unplug the wiring harness from old timer. Removed old timer. Replaced timer. Plugged the wiring harness back into new timer. Put panel back on. Turned power back on . Checked out . Thanks for the great service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from COLUMBIA, MD
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle on the dryer broke
This was super simple - even I could do it! I followed the 3-step instructions which basically described how to hold the new handle and pushed it into the holes in the door. Less than 30 seconds and no tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from HUDSON, WI
- Parts Used:
- WPW10185992
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Timer on my dryer would not rotate so dryer would not turn off
With the help of YouTube, I diagnosed the problem, ordered the part, and with more help from YouTube, changed out the timer. My husband was impressed and I saved a few hundred dollars on a service call. :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from REXFORD, NY
- Parts Used:
- WPW10185992
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer timer know broke
Took the 4 small screws holding the back plate in place off. Then removed all the wiring clips from the old timer. Removed the 2 screws holding the timer in place, then removed the timer and the last wiring clips. Put the new timer in place and then put all the wiring clips back on. Closed up the panel and moved the dryer back into place. Total time was about 20 min.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- susan from SAUSALITO, CA
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
handle from dryer broke off and couldn't snap it back in place.
We didn't even look at the instructions. Just rotated the handle until it snapped back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beverly A from MANHATTAN, KS
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke off door of clothes dryer.
New handle just snapped in - really easy. Have to compliment Part Select - I ordered handle one day and it was delivered the next day. Impressive!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David E from SUMMERVILLE, SC
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken Door Handle
I snapped the new handle into place, it took 2 seconds. The new handle was made thicker and stronger than original. Its unlikely I will be doing this repair again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Hasso from PALM COAST, FL
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The dryer handle broke.
When I ordered the part over the phone was told it just snaps in. Not sure what it meant. Parts delivery was prompt. Looked at the part and it’s pisition on the dryer.And it really was very simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from DEFIANCE, OH
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
door handle broke
ordered a replacement handle - installed it myswelf
Was this instruction helpful to you?
Thank you for voting!