WED5010LW0 Whirlpool Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JOHN from PUNTA GORDA, FL
- Parts Used:
- 4392065
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Will Not Tumber
I use the manentance kit that was not the problem. I end buying the drive motor and that was it. I was happy with the service I got from part select, overnight mail what more could I ask for? I am also glad I replace everthing with mainentance kit. Thank you for your help john degnan
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Valley Mills, TX
- Parts Used:
- 12002641
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
Dryer side vent not right one.
I ordered a Maytag side vent kit, #12002641, I received a part #2003961.The kit had 2 vent pipes that were about 4" x 24" and an 4" Ell. $105.00. Both vent pipes were too long. I was desperate to get my new dryer installed, so I took the vent pipes to my cutoff saw and made the fit. I then found the right part PS2003058, on your website at a price of $36.22.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from PHILADELPHIA, PA
- Parts Used:
- 4392065
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
Dryer was making loud noises.
Pretty much followed your great video: . Watching it gave me the confidence that I could accomplish the job myself.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEVE from FULDA, MN
- Parts Used:
- 4392065
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
drum roller were worn out
flipped up the top pulled the front off easy access to drum removed the drum replaced rollers per instructions that came with package. very eas job. works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from HUDSON, MI
- Parts Used:
- 4392065
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Socket set
Drum wouldn't move. Belt Broken.
Opened the cabinet and removed the drum. Cleaned out the dryer fuzz. found that the roller stabilizer wasn't in place; apparently due to a previous repair. Replace both rollers and the roller stabilizer and prepared to replace the drum. But because I live alone, I didn't have anyone to hold the drum while I connected the belt to the motor. But, I did have three unused balloons which I partially inflated and set the drum on them in the bottom of the cabinet while I hooked up the belt to the motor. Put everything back together and it is now drying my clothes again. :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margo from FOX ISLAND, WA
- Parts Used:
- 4392065
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Dryer was making bad noises like a bearing was going out, then it got worse and sounded really loud, so I couldn't even run it.
Followed the instructions found online. Only thing I would add is that the clips are easier to work with if you warm them up a little before you try to install them.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Allan from JOHNSTON, RI
- Parts Used:
- 4392065
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
belt worn
replaced rollers, belt and pulley. Video was very helpful
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from CHEYENNE, WY
- Parts Used:
- 4392065
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Noisy, screeching, sounded like roller bearings were shot
Watched the video, followed the printed instructions for reminder when necessary. Needed a second person briefly to hold the dryer tub when installing the new belt, and also when removing/replacing the front panel. Beyond that, it was straight forward and relataively easy to do. Solved the noise problems and it dries more evenly now as well. The one thing the instructions don't say is to check the rear canvas seal when the tub is re-inserted into place to assure it doesn't fold back on itself.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- susan from SAUSALITO, CA
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
handle from dryer broke off and couldn't snap it back in place.
We didn't even look at the instructions. Just rotated the handle until it snapped back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from DEFIANCE, OH
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
door handle broke
ordered a replacement handle - installed it myswelf
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from LUMBERTON, MS
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
My handlke broke on my dryer.
I opened the package with my new handle in it that I got from PartSelect, and snapped it right in place. No tools needed, took only seconds!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beverly A from MANHATTAN, KS
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke off door of clothes dryer.
New handle just snapped in - really easy. Have to compliment Part Select - I ordered handle one day and it was delivered the next day. Impressive!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David E from SUMMERVILLE, SC
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken Door Handle
I snapped the new handle into place, it took 2 seconds. The new handle was made thicker and stronger than original. Its unlikely I will be doing this repair again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Hasso from PALM COAST, FL
- Parts Used:
- W10861225
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The dryer handle broke.
When I ordered the part over the phone was told it just snaps in. Not sure what it meant. Parts delivery was prompt. Looked at the part and it’s pisition on the dryer.And it really was very simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gayle from TEXAS CITY, TX
- Parts Used:
- W10861225
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken dryer door handy.
Just popped it into place. Was very easy. Took less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!