Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does no...
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
September 6, 2022
Code stored on the front control panel looks like a upside down f and a backwards 3, the dryer runs for 5sec and shuts off, is it possible the motor assembly for this dryer
For model number DV42H5000EW
Hi Greg, thank you for contacting us. The F3 error code occurs when five consecutive loads are dried without registering moisture sensor data. Pressing the 'Power' button will clear the error code and allow you to restart the machine. If the error is still there, you need to check the Moisture Sensor, part number FIX4206812. You will also need to check the thermistor, part number FIX4204984, for continuity. Please submit a new question if you have any follow ups.
Dryer would not start but electronics were working.
Pulled top of dryer off; noticed the belt was loose but not broken. Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.
Ordered replacement wheel/arm. One screw to remove old one, one screw to install new one...tentioned the belt. Dryer was good as new.
Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning!