DVG60M9905V (A3) Samsung Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Eric from CHAMBERSBURG, PA
- Parts Used:
- DC61-02627A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Dryer getting warm but turning off before clothes dry
Cleaned the sensors from inside the drum with alcohol and that did not work. Ordered two sensors. Lift top cover. Remove screws on each of the front side that secures front cover. Unplug door sensor and pull front cover towards you and lift at same time removing from frame. I own dogs and immediately noticed dog hair and surprisingly lint all over the place. Remove the screws from the lint trap. (Theres one you access from inside the drum.) Unplug your sensor wires. Remove lint trap. The sensors simply push in/out. While I was in there I removed the cover for the lint tube and cleaned it out good. Lint had started to gather around the fan. Reverse your process and your done. TIP: Keep your screws orderly as you unscrew them. If you have this problem, just a good cleaning of hair, lint, dirt may do the trick as it essentially packs around the plug of the sensors. I had already ordered my sensors so I just put them in. I took my time and cleaned good and it was about an hour. It could be done in 15-30 minutes easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from San Diego, CA
- Parts Used:
- DC62-00262A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door seal was torn and falling apart
Separated the outer door from inner door, removed glass globe. Replaced the seal
Reassembled
Reassembled
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- michael from STATE COLLEGE, PA
- Parts Used:
- DC61-02627A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Moisture sensor not working. Dryer would not shut down when clothes were dry.
*** Unplug Dryer ***
Spent years (PITA) trying to figure out how to do this repair.
About 2 weeks ago I came across this U-Tube video.
This video really saved the day and I cannot tell you how much I appreciate this guys video.
Here is the link to an awesome video.
https://www.youtube.com/watch?v=6u1_gnJAQ5U
Tip: It may help some of you to bring up this video on your phone or laptop to reference as you do the repair.
Good luck
M
Spent years (PITA) trying to figure out how to do this repair.
About 2 weeks ago I came across this U-Tube video.
This video really saved the day and I cannot tell you how much I appreciate this guys video.
Here is the link to an awesome video.
https://www.youtube.com/watch?v=6u1_gnJAQ5U
Tip: It may help some of you to bring up this video on your phone or laptop to reference as you do the repair.
Good luck
M
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jordan, from NIOTA, TN
- Parts Used:
- DC61-03128A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
dryer leveling legs were missing
We unstacked our washer and dryer and needed dryer feet again.
Was this instruction helpful to you?
Thank you for voting!