Models > DVG45T6100P > Instructions

DVG45T6100P (AC) Samsung Dryer - Instructions

Jump to:

All Instructions for the DVG45T6100P

Customer:: John from EARLYSVILLE, VA
Parts Used:: DC93-00634A
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Screw drivers

Dryer would not spin

The design of my dryer is a bit different from the video on PartSelect - but it is very close. And if you watch the really good video on PartSelect plus a few others on Youtube you can figure out how Samsung in general designs the different components. You can fix this yourself definitely.

Cost of part to fix - about $50.
Repairman - didn't even ask. Would probably be $300-400.
Cost of replacement $1,000.

I rated the repair "A bit difficult" only because this is the first time I have ever repaired an appliance. If I were to repair this one again, I'd rate it as Easy.

I'm really thankful for the PartSelect video. This makes DIY repairs possible.

Thanks.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jesse from FULLERTON, CA
Parts Used:: DC97-23529E
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

making a clunky noise, taking longer to dry

removed the top cover, remove control panel,remove door, remove belt assy, and pull out old drum and installed new drum. Used only a phillips screw driver and took approx. 30 min. Dryer is quit and drying better.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: John m from GRAPEVIEW, WA
Parts Used:: 6602-001655
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Original belt broke after nylon tension pulley bearing froze.

Thank you
partselect.com for a much better heavy duty belt than the original. Way over priced, but well worth it. After watching the video & following it step-by-step, I now have a perfectly running dryer. P.S. don't forget to plug back in the (3) wire harnesses. The entire experience was a great feeling of accomplishment. Thanks again partselect.com

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jordan, from NIOTA, TN
Parts Used:: DC61-03128A
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

dryer leveling legs were missing

We unstacked our washer and dryer and needed dryer feet again.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Anthony from FLORAL PARK, NY
Parts Used:: 6602-001655
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Drier did not turn it was not the belt

I still had to take it apart there was a small sock stuck in the fan that blowes the lent out my wife left the lent filter out one time. Your video was a great help. I'm a mechanic and it was easy thanks Anthony Ratto Tulipbike82@aol.com

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Leslie from Frederick, MD
Parts Used:: DC32-00007A
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

The dryer shut itself off and displayed error code TO

Took off the back of the dryer and replaced the thermistor. A $7 part that would have been a couple hundred dollars if we had to call a repairman.

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Corrado from YONKERS, NY
Parts Used:: DC93-00634A, 6602-001655
Difficulty Level:: Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers

Hooking up belt and pully

Followed video and YouTube most was easy.... put the hooking up the belt took time

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the DVG45T6100P