Models > DV484ETHASU > Instructions

DV484ETHASU (A1-01) Samsung Dryer - Instructions

Jump to:

All Instructions for the DV484ETHASU

Customer:: John from EARLYSVILLE, VA
Parts Used:: DC93-00634A
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Screw drivers

Dryer would not spin

The design of my dryer is a bit different from the video on PartSelect - but it is very close. And if you watch the really good video on PartSelect plus a few others on Youtube you can figure out how Samsung in general designs the different components. You can fix this yourself definitely.

Cost of part to fix - about $50.
Repairman - didn't even ask. Would probably be $300-400.
Cost of replacement $1,000.

I rated the repair "A bit difficult" only because this is the first time I have ever repaired an appliance. If I were to repair this one again, I'd rate it as Easy.

I'm really thankful for the PartSelect video. This makes DIY repairs possible.

Thanks.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jordan, from NIOTA, TN
Parts Used:: DC61-03128A
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

dryer leveling legs were missing

We unstacked our washer and dryer and needed dryer feet again.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paul from FIRESTONE, CO
Parts Used:: DC97-14486A
Difficulty Level:: Easy
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers, Socket set

high limit thermostat and heating element were bad.

I would like to direct the attention to PartSelect instead of my repair. They were awesome in helping me to get my parts. I had called, a few minutes after the deadline for overnight shipping, the gentleman helping me, pushed the order through and I got my parts the next day, allowing me to repair my dryer. I have ordered several parts, for several different appliances, (all Samsung) and PartSelect has always come through for me. Excellent Customer Service!!
P.S. Don't buy Samsung appliances unless you want to get good at repairing them!

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: jose from MISSOURI CITY, TX
Parts Used:: DC97-16782A
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

noise when drying

replace Drum support roller & axel and belt

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Anthony from FLORAL PARK, NY
Parts Used:: 6602-001655
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Drier did not turn it was not the belt

I still had to take it apart there was a small sock stuck in the fan that blowes the lent out my wife left the lent filter out one time. Your video was a great help. I'm a mechanic and it was easy thanks Anthony Ratto Tulipbike82@aol.com

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Leslie from Frederick, MD
Parts Used:: DC32-00007A
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

The dryer shut itself off and displayed error code TO

Took off the back of the dryer and replaced the thermistor. A $7 part that would have been a couple hundred dollars if we had to call a repairman.

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Corrado from YONKERS, NY
Parts Used:: DC93-00634A, 6602-001655
Difficulty Level:: Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers

Hooking up belt and pully

Followed video and YouTube most was easy.... put the hooking up the belt took time

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the DV484ETHASU