DV338AEBXAA Samsung Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Beatriz from Sharonville, OH
- Parts Used:
- WP35001193, WP35001191
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
the thermistor was open circuit
I change the Thermistor 3 bracket and worked well for 10 minutes and the thermistor is broken again
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from West Palm Beach, FL
- Parts Used:
- WP35001193
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dryer turns on no heat
Test thermal fuse for resistance. If has 0 resistance you have a bad fuse. Also check voltage going to wall outlet. Must use at least 600 volt tester. Motor will run on 110 volts, but will not activate heating element. Heating element must have 240 volts to operate. Always make sure you turn off power when working on electrical problems. Be safe and good luck.
Was this instruction helpful to you?
Thank you for voting!