Models > MED5500FC1 > Parts

MED5500FC1 Maytag Dryer - Parts

Jump to:

13 - 24 of 137
Keep searches simple, eg. "belt" or "pump".
This sturdy metal hinge helps your front-load washer or dryer door open and close smoothly. If your door is sagging or not closing right, replacing the hinge can fix the issue. It’s built to last and ...
In Stock
Order now and your part arrives by Mar 28
Hearing squealing or grinding from your dryer? The motor pulley might be the culprit. This part helps the drum spin by supporting the belt where it connects to the motor. It’s a genuine replacement an...
In Stock
Order now and your part arrives by Mar 28
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Order now and your part arrives by Mar 28
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...
In Stock
Order now and your part arrives by Mar 28
$7.60
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Mar 28
Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.
In Stock
Order now and your part arrives by Mar 28
$19.63
In Stock
Order now and your part arrives by Mar 28
The thermal cut-off (fuse) is meant to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you must replace it. The hi-limit thermosta...
In Stock
Order now and your part arrives by Mar 28
This thermostat helps keep your dryer safe by turning off the heat if things get too hot. If your dryer’s overheating or not working right, this part might be the fix. It’s made to fit your model and ...
In Stock
Order now and your part arrives by Mar 28
This OEM dryer drum belt measures approximately 92-1/2" and features 5 ribs and 4 grooves. It connects the drum to the motor pulley, allowing the drum to spin. Replace if the dryer isn’t tumbling, mak...
In Stock
Order now and your part arrives by Mar 28
NOTE: As per manufacture the felt seal is no longer needed with the lint filter.
In Stock
Order now and your part arrives by Mar 28
This shaft is for the front with right hand thread. Sold individually.
In Stock
Order now and your part arrives by Mar 28
13 - 24 of 137