MGDC700VJ1 Maytag Dryer - Parts

Metallic screw that is less than an inch long. Does not include the plastic washer.

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Converts natural gas burners to liquid propane.

This thermostat has an internal heater L155-25F. This thermostat controls the internal drying temperature.

Sold Individually.

If your dryer won’t start, stops too soon, or keeps running, the timer might be the issue. This part controls how long your dryer runs and shuts it off when the cycle’s done. It’s located behind the c...

This OEM dryer drum belt measures approximately 92-1/2" and features 5 ribs and 4 grooves. It connects the drum to the motor pulley, allowing the drum to spin. Replace if the dryer isn’t tumbling, mak...

A dryer start relay switch is an interface between the user and the dryer, initiating the drying cycle when pressed. It ensures that the dryer starts only when the button is deliberately pressed, prev...

This part is the replacement motor pulley for your dryer. The motor pulley allows the dryer belt to run straight while the dryer is operating. If your motor pulley is damaged, your dryer may not tumbl...

The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.

This shaft is for the front with right hand thread. Sold individually.