MDE9357AYQ Maytag Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- kevin from rockton, IL
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
P;atic latch in in door frame broke.
I removed two screws from the bottom panel,pulled bottom out, and lifted front panel off. Took pliers to back of the old latch to compress the expansion tabs, squeezed and removed. Pushed new one in untill it went through metal backing plate and snapped in place. Replaced the cover and screws. Opened door and took out two screws on the edge and one for the knob. Spread out door halves,used pliers to work out other latch part. Pressed in new part and reassembled. Works great for another twenty years!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Newt from Daphne, AL
- Parts Used:
- W10169313
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Dryer would not come on
When the dryer stopped working, I checked the two switches to see if they were good. The start button checked out OK but the switch on the door read bad. Ordered the part with the part number and put on when it arrived. Just a matter of disconnecting and reconnecting three wires. Very simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathryn from Scotts Valley, CA
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
the receiving side of the door latch broke
I entered the model number and make of the dryer, selected the door latch part and ordered. My order had a link to a video that explained installation. It was pretty easy, and I am a girl :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Kirkland, WA
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Broken plastic door latch
Used nut driver to remove front cover/door assembly. Used screwdriver to pry broken latch receiver out of front cover. Snapped new latch receiver in cover. Old striker/latch nub retained. Reattached cover/door assembly.
Was this instruction helpful to you?
Thank you for voting!