MDE26CTADG Maytag Dryer - Parts

This sleeve is less than an inch in diameter. It is made of metal and is intended for use with the screw that holds the idler pulley of your clothes dryer.

This gray levelling leg foot pad is made of rubber and is just over an inch in diameter. Sold individually.

Made for use with series 08 and later gas and electric clothes dryers, this pre-stretched heating element coil carries 240 volts.

A dryer's idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.

This thermal fuse is mounted on either the heating element or burner tube housing.

Sold Individually.

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost fifteen inches long with an approximate seven inch diameter. This element includes thermal fuse and heat shield.

This thermal fuse mounts on your dryer's blower wheel housing. It will cut out once your dryer's internal temperature reaches 183 degrees Fahrenheit, and will not cut in again. Like a house fuse, you ...

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost 14 inches long with an approximate 6-1/2 inch diameter. Element does not include a thermal fuse or a heat shield.

This kit comes with two ceramic insulators.

Sold individually.

10 - 16 x .375