MDE6000AYW Maytag Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mike from Boulder, CO
- Parts Used:
- WP307178
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Dryer produced no heat.
I searched for possible symptoms and viewed a video about how to remove the heating element. There were three possible parts listed for this symptom: Thermostat, thermal coupling and heating element. I decided to check the heating element continuity, so I removed the heating element. Once I looked at the heating element, I could see a break in the heating coil, so I know the problem. I put my existing thermostat on the new heating element, plugged in 4 wires and installed two screws to secure the heating element, then reinstalled the front cover to the dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margaret from Bedford, TX
- Parts Used:
- 12001541
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers
It was making a lot of noises
IT was good My husband fixed it .sorry we didn't take video but it is working alright. Thank you
Was this instruction helpful to you?
Thank you for voting!