Models > DE21CS > Parts

DE21CS Maytag Dryer - Parts

Jump to:

13 - 24 of 187
Keep searches simple, eg. "belt" or "pump".
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order within the next 8 hrs and your part ships today!
This high limit/safety thermostat is used on many of Maytag's brands of gas and electric clothes dryers. With this thermostat, a dryer's heating element will cut out if the internal temperature reache...
In Stock
Order within the next 8 hrs and your part ships today!
This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.
In Stock
Order within the next 8 hrs and your part ships today!
This idler shaft retaining ring is well under an inch long and is made of metal.
In Stock
Order within the next 8 hrs and your part ships today!
This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers.
In Stock
Order within the next 8 hrs and your part ships today!
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 de...
In Stock
Order within the next 8 hrs and your part ships today!
This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.
In Stock
Order within the next 8 hrs and your part ships today!
Sold Individually. This adjustable leveling leg comes with a stop nut.
In Stock
Order within the next 8 hrs and your part ships today!
$13.09
This screw is sold individually.
In Stock
Order within the next 8 hrs and your part ships today!
This front cover spring retaining clip is not quite an inch long. It is made entirely of metal and is used for some washing machines.
In Stock
Order within the next 8 hrs and your part ships today!
This motor comes with a redesigned motor switch and new wire terminals. This part runs at 1/4hp. It performs 1725 revolutions per minute and carries 4.5 amps and 115V.
In Stock
Order within the next 8 hrs and your part ships today!
This sleeve is less than an inch in diameter. It is made of metal and is intended for use with the screw that holds the idler pulley of your clothes dryer.
In Stock
Order within the next 8 hrs and your part ships today!
13 - 24 of 187