MDE14PSADW Maytag Dryer - Parts

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...

This high-limit thermostat helps protect your dryer from overheating by cutting power to the heating element at 200°F and resetting at 170°F. It features two 1/4-inch male terminals and is compatible ...

This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.

This push button is just over three inches long. It is all black in color and is made of plastic.

This thermal fuse is mounted on either the heating element or burner tube housing.

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost fifteen inches long with an approximate seven inch diameter. This element includes thermal fuse and heat shield.

This male door strike is just under an inch long. It is made of metal.

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost 14 inches long with an approximate 6-1/2 inch diameter. Element does not include a thermal fuse or a heat shield.

This clip is designed to hold a timer knob in place.

10 - 16 x .375

This hinge hole cover is sold individually and white in color. Two are required per appliance.

This door strike bracket is an inch long. It is made entirely of metal and is used with male door strikes of clothes dryers.