LDE9900ACL Maytag Dryer - Parts

This gray levelling leg foot pad is made of rubber and is just over an inch in diameter. Sold individually.

A dryer's idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.

This thermal fuse is mounted on either the heating element or burner tube housing.

Sold Individually.

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost fifteen inches long with an approximate seven inch diameter. This element includes thermal fuse and heat shield.

This thermal fuse mounts on your dryer's blower wheel housing. It will cut out once your dryer's internal temperature reaches 183 degrees Fahrenheit, and will not cut in again. Like a house fuse, you ...

Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 140 degrees Fahrenheit and a differenti...

This part helps determines the dryness of the clothes to reduce over – drying.

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost 14 inches long with an approximate 6-1/2 inch diameter. Element does not include a thermal fuse or a heat shield.

This filter has a small magnet implanted in the top corner.

Also known as cycling thermostat with internal bias heater - L150-25 - 5 terminal.

This thermostat controls the internal drying temperature. Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermos...