SE-4670 (AFTERS71V5731) Maytag Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Nicholas from Tacoma, WA
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Latch
The dryer latch had fallen into the dryer door itself and the door no longer stayed latched shut. I purchsed a replacement latch and simply popped it into the hole. No tools! I did leave the old latch to rattle around inside the door whenever it opens though.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- keith from Brookhaven, PA
- Parts Used:
- 306436
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken door latch, door did not stay closed
Saved a lot of time by just using needle nose pliers to break the receiving end of latch off of the front of the dryer. No big deal if parts fall Inside, won't hurt anything. Then just pressed new part into front of dryer. No need to remove front dryer panel.latch piece on door was not broken so I left it alone. Took all of about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Kirkland, WA
- Parts Used:
- 306436
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Broken plastic door latch
Used nut driver to remove front cover/door assembly. Used screwdriver to pry broken latch receiver out of front cover. Snapped new latch receiver in cover. Old striker/latch nub retained. Reattached cover/door assembly.
Was this instruction helpful to you?
Thank you for voting!