DE308 Maytag Dryer - Parts

This 115-volt, 60 Hz drive motor powers the drum in select Whirlpool and compatible dryers. It features a 1/4 horsepower output and a redesigned switch with updated wire terminals. Replace if the drye...

This sleeve is less than an inch in diameter. It is made of metal and is intended for use with the screw that holds the idler pulley of your clothes dryer.

This gray levelling leg foot pad is made of rubber and is just over an inch in diameter. Sold individually.

This heating element consists of two pieces: a metal tube and a coil. It carries 240 volts and is approximately 17 inches long with an approximate 7 inch diameter.

Made for use with series 08 and later gas and electric clothes dryers, this pre-stretched heating element coil carries 240 volts.

A dryer's idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.

Sold Individually.

This gray upper dishrack kit fits select dishwashers. It requires assembly, and non-adjustable models may need roller transfer. The updated design may differ slightly but functions the same.

The tumbler seal can be used for the front or rear. Sold individually.

This kit comes with two ceramic insulators.

10 - 16 x .375

The blower housing seal makes an airtight seal between the blower housing and the blower housing cover in the dryer.