Models > DLGX3002R > Instructions

DLGX3002R (ACREEUS) LG Dryer - Instructions

Jump to:

All Instructions for the DLGX3002R

Customer:: ROBERT from DAWSONVILLE, GA
Parts Used:: 3911EZ9131X
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Install aftermarket side vent kit

I did as I was told (by my wife). Bought the machine from Home Depot - no side vent kit - had them complete the installation today when the kit came.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Barbara from CUDAHY, WI
Parts Used:: 6323EL2001B
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

no heat

To install the repair part took about 5 minutes. It took a couple hours to take apart of put back together. Unfortunately the part I replaced was not the problem. I still have no heat. My own fault for not testing the parts before ordering. It seems there is no ignition of the gas for the hot air flow. I would be grateful for any suggestions. The video was FABULOUS...really step by step, screw by screw. Thanks for that. Barb Swenson

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jean from MAPLEWOOD, NJ
Parts Used:: MDS47263101
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Door Gasket

I'm a technician Mechanic using my skills for fix that's

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Frank from Whittier, CA
Parts Used:: 4581EL2002L
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Screw drivers

Thumping sound when dryer is on.

I took the top off, I disattached the front and took the front top of dryer off, taking the front of dryer off, detached the belt and took the drum out, found the wheels took the plastic triangle off and took the wheels off and replaced wheels, then did everything in reverse and no more thumping. just remember to unplug unit before working on it. And also Part Select is a very good site and place to get parts, very fair priced and very professional.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paul from Marriottsville, MD
Parts Used:: 4681EL1008A
Difficulty Level:: Easy
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers

Changed mottor

I had ask how to get the top off., it was simple ,take 3 screws off the bottom angle bracket .and slide top back about 2" then lift.then remove the front panels. '

Was this instruction helpful to you?

Customer:: BILLHOPEN from SUTTON, WV
Parts Used:: AGM30045804, AGM30045804, 6931EL3002M, 6500EL3001A, 6323EL2001B
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins

My dryer was not heating

First I just replaced the ignitor on a hunch, (disassembly was easy once I saw the video) I also examined the high limit thermostadt and found it was tripped, so I reset the button. the dryer fired up, but soon the thermo tripped again. I found that I could reach it with my arm placed in the inspection port,( about a 4 inch diameter pop out) make sure you unplug first, find the button near the ignitor, and pop it in. the high limit thermo was only holding a few seconds, so I decided to replace it, and did a "shot-gun" approach, replacing all thermos and thermisters at once, only about 35 bucks delivered...BTW, PartSelect shipped them to me at the speed of light.....one day ! Ireplaced all thermos and did and extra scrulpoulous cleaning of the vent. NOTE: it is completely possible that ahe only problem was a reduced vent capacity cmbined with summer heat leading to tripping the high limit thermo....however the thermo was tripping waaaay too easil in my opinion. Anyway, I celebrated doing 10 loads of piled up laundry, and basking in the glory of my wife's admiration for saving a $1000. appliance replacement. "how did you know how to do this honey?" "yoir so smart" (i did'nt tell her about the PartSelect video)

Was this instruction helpful to you?

Customer:: Inland Commercial Appliance from Moreno Valley, CA
Parts Used:: AGM30045804, AGM30045804, 6931EL3002M, 6500EL3001A, 6323EL2001B
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

Not heating correctly

Removed Top, then front and drum. Parts easy to access once drum is out. Recommend reading up on drum replacement. Would appear that all repairs will require taking it out.

Was this instruction helpful to you?

Customer:: Dennisd from Waco, TX
Parts Used:: AGM30061302, AGM30045804, AGM30045804
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Screw drivers, Socket set

Shutting off a while after starting. Burning smell.

Seemed to be shutting off on the safety thermostat so I replaced them all. Works.

Was this instruction helpful to you?

Customer:: Antonio from Southbury, CT
Parts Used:: 4581EL2002L, 4400EL2001A
Difficulty Level:: Easy
Total Repair Time:: More than 2 hours
Tools:: Screw drivers, Socket set

Loud rhythmic knocking sound

You will need a helper. Dismantle the Dryer: Remove the screws that hold the top cover, front control panel, front door and front panel. Release the V-Belt under the drum. Remove the Drum. Removed and replace the 2 Front roller assemblies - these were completely worn. Replaced the 2 rear rollers (did not replace the rear roller axels as these were more difficult to remove and they were in good shape) and the V-Belt while I had the whole thing open. Use a shop vac and cleaned up the whole unit. It is so nice and quiet now.

Was this instruction helpful to you?

Customer:: Jason from Davenport, IA
Parts Used:: MCK49049101
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

a piece of plastic broke by the lint trap

with expert precision

Was this instruction helpful to you?

Customer:: Paul from Grosse Pointe Farms, MI
Parts Used:: ADQ56656401
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

One corner of th elint filter kept sticking up and catching clothes on it.

R&R new lint filter.Old filter appears to have been made improperly and the out frame was warped raising the cormer that kept catching the clothes.

Was this instruction helpful to you?

Customer:: David from Boise, ID
Parts Used:: AJQ75298102
Difficulty Level:: Very Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

Hole in drum

Found YouTube video followed it closely and did extensive cleaning. The lint on the felt of the drum was causing a rough rotation as well.

Was this instruction helpful to you?

Customer:: Thomas from Los Altos, CA
Parts Used:: AJQ75298102
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

fractured, broken drum.

Easy repair, more time spent de-linting the inside of the machine and the duct system.

Was this instruction helpful to you?

Customer:: Nathan from Mount Vernon, WA
Parts Used:: 5318EL3001A
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Wrench set

I broke the igniter while adapting from Natural gas to LPG

This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks.

Was this instruction helpful to you?

Customer:: Rand from Panama City, FL
Parts Used:: MEA49050001, ADQ56656401
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Lint and guide filter had become damaged

Really easy to do! Unscrewed 4 screws, pulled flap on bottom of inside guide out. Then gently shake assembly to loosen from dryer and pull up and out! Then based on the assembly can replace front or back or both. They snap together! Put assembly replacement back in and close flap and secure in place with the four screws.

Was this instruction helpful to you?

All Instructions for the DLGX3002R