KEYS750JQ0 KitchenAid Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Charles Weston from Pikesville, MD
- Parts Used:
- 341241
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Does not turn or tumble
Well, to Figure the issue I took the entire thing apart. Actually a lot more than needed. I found the torn belt and ordered it. I did not realize I may need a new belt tensioner which is sold with a wheel for the belt to wrap around and be tensioned by. Actually the original just utilized a rubber c or u shaped design(no wheel) for the belt to slide over. Anyways, instead of ordering and waiting for a new wheeled belt tensioner, I installed new belt with all original parts and working fine. I did oil up the drum rollers to reduce noise. And since I took the whole thing apart I cleaned the lint from every place it could hide. Ps a coke can is said to be helpful to hold the drum up while installing the belt but I found a jug of laundry detergent did better. Totally easy project for someone with no appliance repair history
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kevin from madison, WI
- Parts Used:
- 341241
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
broken belt that makes the dryer drum go around
The broken belt was found when I opened the dryer. The part number was on the belt and a quick online search led me to PartSelect. The part was available, delivered in less than 2 days and there was an online video showing the entire repair in detail.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Memphis, TN
- Parts Used:
- 279816
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver
Dryer will not cut on
My ground wire in my electrical box was not connected.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Ithaca, NY
- Parts Used:
- WP3387134
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
timer did not advance
I watched the video. Thermostat wasn't the problem tho. It was the timer.
Was this instruction helpful to you?
Thank you for voting!
Dryer wasn't heating up
The parts above did not fix the problem. We also bought 2 gas valve coils and igniter after installing them the dryer works perfectly
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- timothy from sheridan, WY
- Parts Used:
- WP3392519
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
dryer just shut off and would not start
went online to whirlpool typed in my problem and. was directed me to Partselect which said it was thermal fuse and had picture where it was located and how to replace,easy as that.thank you PartSelect.Tim
Was this instruction helpful to you?
Thank you for voting!