Models > 11069132413 > Instructions

11069132413 Kenmore Dryer - Instructions

Jump to:

All Instructions for the 11069132413

Customer:: Joan from MANLIUS, NY
Parts Used:: 4392065
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

Loud screeching when dryer tumbles

We had to pop open the top. Unscrew front of dryer from sides. Disconnecting the wires was a bit more difficult than expected. We had to use a tiny screwdriver to slide into the sides of the white wire connector on each side before pulling apart. Front drum falls when front of dryer is removed. It took two of us to reassemble - one to hold the drum while the other put the front on. Our problem turned out to be one wheel. We replaced both wheels and saved the rest of the parts. Hums along just fine.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Margo from FOX ISLAND, WA
Parts Used:: 4392065
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

Dryer was making bad noises like a bearing was going out, then it got worse and sounded really loud, so I couldn't even run it.

Followed the instructions found online. Only thing I would add is that the clips are easier to work with if you warm them up a little before you try to install them.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Allan from JOHNSTON, RI
Parts Used:: 4392065
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

belt worn

replaced rollers, belt and pulley. Video was very helpful

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: STEVE from FULDA, MN
Parts Used:: 4392065
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

drum roller were worn out

flipped up the top pulled the front off easy access to drum removed the drum replaced rollers per instructions that came with package. very eas job. works great.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Trevor from Puyallup, WA
Parts Used:: 279640
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Squeaky tension pulley

Very easy repair... The video was really helpful too. I was able to find a different video that was closer to our model. (Front Loader HE) It probably took me a little longer than needed but I took the time to shop-vac everywhere I could, since it was all easy to get to. I opted for next day shipping so the shipping charges were more than the part. Tools I used were: Cordless drill-screw driver, 1/4in. socket, Phillips head bit and needle nose pliers for the control panel connections. Thank you again for making this so easy. Saved us a lot money by not calling an appliance repair tech.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joe from St. Louis, MO
Parts Used:: WPW10512946
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers

My daughter threw a heavy wet comforter into the dryer and the tri-ring sheared off.

I ordered the part(and a backup) and had it in two days. 5 days less than ordering from sears.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Carl from MARION, KY
Parts Used:: WPW10359272
Difficulty Level:: Really Easy
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Pliers, Socket set

Rollers making a noise.

Removed the top, removed lower front cover, removed the front, removed the belt, removed the drum and the back. Removed and replaced roller support shaft and drum roller’s. Completed all Front and rear support for drum. Replaced drum , replaced drum roller belt and replaced back, completed replacement of the top, front.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Thomas from TULELAKE, CA
Parts Used:: WPW10314173
Difficulty Level:: Very Difficult
Total Repair Time:: 30 - 60 mins

dryer making noise. order parts

YOU NEVER SENT ME THE PARTS!!!
I had to drive to a parts store to find them. On January 17, 2024, I tried to call you when the parts did not arrive and your recording said there were no reps available and you hung up. WE CANNOT GET HELP TO CANCEL THIS ORDER. We have been going in circles with PartSelect and shipping. SO, how do I get my refund of the $107.26 for the parts that I never received!!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: DANIEL from FOND DU LAC, WI
Parts Used:: W10837240
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Socket set

Loud squeaky sound at start up

Pulled the back panel off with nut driver , reached in removed belt from pulley , disconnected the spring , removed the the 1 bolt holding the bracket .
Put the new one in , in reverse order . Very simple , maybe 15 minutes total . While back is off , shop vac out any lint !!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joseph from Canonsburg, PA
Parts Used:: W10837240
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

Loud squeal noise when dryer running

I took off the back panel off the dryer. The idler pulley could be accessed on the bottom. It was a bit cramped but not too tough to replace.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Edwin from PASADENA, TX
Parts Used:: 279640
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Idler pulley broke off.

Took back panel off, and it was really easy putting the new idler pulley in.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: DW from ALVIN, TX
Parts Used:: WP8577274
Difficulty Level:: Very Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

F-26 Fault message

Message indicated something amiss in the motor circuit. Followed Instructions in the on-board manual. Turned out to be the internal-bias thermostat, and the exhaust air thermistor both. Changed faulty parts, cleaned lint from the system and we are off and running again.
Thank You.
DW Pranger

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Allen from KENNETT, MO
Parts Used:: WP8577274
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

Shutting off and had to wait before could turn back on

Followed online video very easy and dryer works like new one....

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Michael from ONEONTA, NY
Parts Used:: WP8577274
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers, Wrench set

The dryer would shut off mid-cycle.

I googled the problem and determined that the thermistor was faulty. I found your web site from which I ordered the replacement part. The part arrived within a week. The replacement was not particularly difficult, but the space was very tight (without removing more panels and covers). I just kept at it and got it installed and the dryer works fine now. There are several pertinent videos on you tube, none of which were my particular model, but the combination of them led me to a successful installation.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mark from MILFORD, CT
Parts Used:: 4392065
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers, Socket set

Broken belt

As seen in video, All Good !

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 11069132413