Models > 110C60222511 > Instructions

110C60222511 Kenmore Dryer - Instructions

Jump to:

All Instructions for the 110C60222511

Customer:: William from HUDSON, MI
Parts Used:: 4392065
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Socket set

Drum wouldn't move. Belt Broken.

Opened the cabinet and removed the drum. Cleaned out the dryer fuzz. found that the roller stabilizer wasn't in place; apparently due to a previous repair. Replace both rollers and the roller stabilizer and prepared to replace the drum. But because I live alone, I didn't have anyone to hold the drum while I connected the belt to the motor. But, I did have three unused balloons which I partially inflated and set the drum on them in the bottom of the cabinet while I hooked up the belt to the motor. Put everything back together and it is now drying my clothes again. :)

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Henry from CHEYENNE, WY
Parts Used:: 4392065
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

Noisy, screeching, sounded like roller bearings were shot

Watched the video, followed the printed instructions for reminder when necessary. Needed a second person briefly to hold the dryer tub when installing the new belt, and also when removing/replacing the front panel. Beyond that, it was straight forward and relataively easy to do. Solved the noise problems and it dries more evenly now as well. The one thing the instructions don't say is to check the rear canvas seal when the tub is re-inserted into place to assure it doesn't fold back on itself.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Margo from FOX ISLAND, WA
Parts Used:: 4392065
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

Dryer was making bad noises like a bearing was going out, then it got worse and sounded really loud, so I couldn't even run it.

Followed the instructions found online. Only thing I would add is that the clips are easier to work with if you warm them up a little before you try to install them.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Allan from JOHNSTON, RI
Parts Used:: 4392065
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

belt worn

replaced rollers, belt and pulley. Video was very helpful

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: STEVE from FULDA, MN
Parts Used:: 4392065
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

drum roller were worn out

flipped up the top pulled the front off easy access to drum removed the drum replaced rollers per instructions that came with package. very eas job. works great.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Beatrice from WALTHAM, MA
Parts Used:: W11778253
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replaced the dryer lint screen filter

removed the old damaged filter and replaced with the new one

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Marilyn from HORNICK, IA
Parts Used:: W11778253
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lint collector was cracked and I was unable to insert easily.

Simply removed old dryer lint collector and installed the new one.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Carmen from CUSHING, ME
Parts Used:: W11778253
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Had a torn lint filter

Removed replacement from box. Threw old one out, the new one fit perfectly, and securely.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jon from KOKOMO, IN
Parts Used:: W11778253
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Handle broke

Placed lint filter in opening and pushed!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Peggy (Hairways) from WOODMERE, OH
Parts Used:: W11778253
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Lint screen had hole and looked like it was scorched

Just slide out lint remover and inserted new one. Very easy

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Roberta from VIRGINIA BCH, VA
Parts Used:: W11778253
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Needed to replace lint filter on my 25 yr old me more dryer

Easily installed lint filter for my 25 yr old dryer Thanks

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: SYDNEY from BOSTON, MA
Parts Used:: W11778253
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Needed a new filter screen for Kenmore Dryer

Pulled out the very old worn out and damaged filter screen and replaced it with a new filter screen.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Maura from Burbank, IL
Parts Used:: W11778253
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Lint screen was broken - replaced it with a new one.

There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.

Fast efficient delivery from Parts Select.com.

No need to publish this I'm sure.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ronald from Anaheim, CA
Parts Used:: W11778253
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken handle on lint filter

received part 4 days after order. very pleased about that! Local Sears Service center was out of stock.

carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: MARY from PORT ALLEN, LA
Parts Used:: 4392065
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set

Belt

My son did the repairs it took less than 30 minutes it's an old dryer so glad to be able to get the parts. I do not like the new dryers because of all the pushbuttons thanks so much for the ports

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 110C60222511