110C61112010 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Veda Jean from Sedilia, CO
- Parts Used:
- WPW10185982
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Automatic dry setting worked but no heat on time dry setting
Replacing the timer fixed this problem. In the center of the timer there is a socket that was hard for me to remove. I had to use a small standard screw driver to push down the middle center plastic piece while someone else was gently pulling on the socket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- June from Hinsdale, NH
- Parts Used:
- WPW10185982
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no heat after 20 min.
removed top plate on rear of dryer. removed timer and replaced wires one at a time and new timer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Calvin from Saco, ME
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter was broken
Tried to replace filter would not fit It was delivered outside and was real cold and stiff after I let it set for awhile it warmed up it fit great. Thank you Calvin
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pat from Zebulon, NC
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The clip that holds the plastic handle to the lint screen broke off.
The new lint screen fit perfectly. All I had to do was slip it in the lint filter slot.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Billerica, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lint screen was worn and not working properly
removed old screen and replaced with new one.I would like to add that PartSelect was the only place i could find the part at a reasonable price, and that it was delivered in record time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ellen from Burlington, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old filter broke
took out old put in new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Dudley, MA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint filter handle broke
Slid the new lint filter into slot on top of my 26 year-old Kenmore dryer and it fit perfectly! Ordered part and received it the next day...unbelievable!! Definitely A+ service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Palatka, FL
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replaced lint filter
The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christian from Battle Creek, MI
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint Filter mesh was frayed.
Purchased a new lint filter. Delivery and installation were no problems. The easiest repair that I've ever done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Wyncote, PA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old lint screen was torn and in need of replacement
The replacement that was ordered was a perfect fit for the worn part and merely required placement into the lint screen area. The entire procedure, from ordering the part, to installation was amazingly easy. I would not hesitate to order future parts from PartSelect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from York, PA
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old lint filter was broken
All I had to do was take out the broken filter and replace it with the new one. It fit perfectly. The replacement took less than 5 minutes. I should have done it a year ago!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Wauseon, OH
- Parts Used:
- WPW10117655
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dryer Stopped Working
Very easy, takes 5 minutes of your time. Actually I replaced my stop-start switch and also the timer. First make sure that you unplug the dryer. Using a 1/4" nutdriver unscrew the nuts holding on the back plate, once that is accomplished unscrew the two nuts that holds the switch and take care to unplug the wires on the switch and plug them onto the new switch, bolt the switch back on and replace back plate, and plug in power and presto you are back in business. The most important thing to keep in mind is when you take a wire off the terminal on the bad part that you swap it to the new one and keep doing that till you have them all switched to the new part. I had to pay a service tech $75 to tell me what was wrong with the dryer, ordered part and it came in 2 days. They wanted to charge me $275 to replace the part and it only took me 5 minutes to replace the part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy from Kingsbury, TX
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lint screen broken
Open box, insert lint screen!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cassandra from Chicago, IL
- Parts Used:
- W11778253
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken part
Replaced the part. It just slid right in to the appropriate space on the dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Denise from Surfside Beach, SC
- Parts Used:
- WPW10185982
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Timer on dryer wasn't working properly...shut off to soon
Easy as pie! Unscrewed old timer, replaced new timer, then removed the wires from the old and applied to the new! Replaced the cover and done! Works like a charm!
Was this instruction helpful to you?
Thank you for voting!