1106012511 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Larry from HICKORY, NC
- Parts Used:
- WP8536939
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The main knob insert snapped.
Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place.
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicates the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Evelyn from JACKSONVILLE, FL
- Parts Used:
- WPW10717210
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Needed a new lint filter
Took the old one out, replaced it with new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from HGHTN LK HTS, MI
- Parts Used:
- WPW10420741
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Thought it wad the start switch $23.00
Paid an extra over night fee Friday $24.00 didn't get it until Tuesday afternoon all in all it cost $51.00 then that wasn't the problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from POLAND, ME
- Parts Used:
- WPW10717210
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint filter cracked
Removed old filter, replaced with new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carmen from CUSHING, ME
- Parts Used:
- WPW10717210
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Had a torn lint filter
Removed replacement from box. Threw old one out, the new one fit perfectly, and securely.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from FAIRPORT, NY
- Parts Used:
- WPW10717210
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Handle broke off of the Lint filter
Removed old filter and replaced with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from KOKOMO, IN
- Parts Used:
- WPW10717210
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Handle broke
Placed lint filter in opening and pushed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peggy (Hairways) from WOODMERE, OH
- Parts Used:
- WPW10717210
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Lint screen had hole and looked like it was scorched
Just slide out lint remover and inserted new one. Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- West from Montgomery, AL
- Parts Used:
- WPW10717210
- Difficulty Level:
- Difficult
- Total Repair Time:
- 15 - 30 mins
The handle would not seat" , with the old dryer lint slot. Had to remove the handle and leave the medal holder , to which the handle was popped on, by slot and hooks.
I inserted the sharp kniife point, pryed back a flap , thus releasing the nylon locking hook, in the slot. then did the other side...I removed the white plastic handle, leaving the metal frame, which lay more flat in the filter channel. I put a box of screws on top of the dryer flap to keep it snug.. this is a Kenmore about 15 years old.
Grahare
Grahare
Was this instruction helpful to you?
Thank you for voting!