Models > 1106012511

1106012511 Kenmore Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 1106012511

Viewing 5 of 5
Bulkhead Parts Diagram and Parts List for Kenmore Dryer
Bulkhead Parts
Cabinet Parts Diagram and Parts List for Kenmore Dryer
Cabinet Parts
Cover Sheet Diagram and Parts List for Kenmore Dryer
Cover Sheet
Optional Parts (not Included) Diagram and Parts List for Kenmore Dryer
Optional Parts (not Included)
Top And Console Parts Diagram and Parts List for Kenmore Dryer
Top And Console Parts
Keep searches simple, eg. "belt" or "pump".
Dryer Screw – Part Number: WP90767
$7.60
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order now and your part arrives by Jun 12
Washer D-Shaped Knob Insert – Part Number: WP8536939
$9.79
This insert is sold individually. Knob not included. Knob is sold separately.
In Stock
Order now and your part arrives by Jun 12
Dryer Push-to-Start Switch – Part Number: WPW10420741
$27.83
In Stock
Order now and your part arrives by Jun 12
Control Knob – Part Number: WPW10711289
$9.79
This control knob is for dryers. Control knob lets you control cycle settings. Remove the knob by pulling it straight off its post.
In Stock
Order now and your part arrives by Jun 12
Refrigerator Single Hex Head Screw – Part Number: WP489069
$7.60
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
Order now and your part arrives by Jun 12
Console Clip – Part Number: WP8312709
$20.72
Sold individually.
In Stock
Order now and your part arrives by Jun 12
8-18 X .625 TR CR AB – Part Number: W11693756
$18.54
Sold individually.
In Stock
Order now and your part arrives by Jun 12
Knob – Part Number: WPW10453948
$48.21
Designed for Whirlpool and compatible dryers, this white push-to-start knob features a 1 3/8 diameter and a Spring Steel D shaft insert. It engages the start switch to begin the drying cycle and is an...
In Stock
Order now and your part arrives by Jun 12
Top Panel – Part Number: WP8563663
$149.73
This white dryer top panel replaces damaged or rusted panels, protecting internal components and keeping the appliance stable. It measures roughly 27 inches wide, 29 inches deep, and 1.5 inches high a...
In Stock
Order now and your part arrives by Jun 12
NUT – Part Number: W11213336
NUT
$6.51
In Stock
Order now and your part arrives by Jun 12
Timer – Part Number: WPW10685024
$148.93
Replace your faulty dryer timer with this durable OEM control. It restores proper cycle timing and ensures your dryer completes each stage reliably. Quick installation makes it an effective fix for st...
In Stock
Order now and your part arrives by Jun 12
Wiring Harness – Part Number: WPW10450286
$131.15
On Order
View More

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Urias
May 6, 2026
What would be the problem if new motor and new start button put on still not working but turn time dry switch and heating element goes on. Help
For model number 1106012511
Fix.com logo
Hi Frank, thank you for reaching out. If the heater is glowing but the motor isn't spinning, the thermal fuse is the likely culprit for this. It acts as a safety cutoff that breaks the electrical path to the motor when temperatures spike, preventing the drum from spinning while allowing the heater circuit to remain energized in certain wiring configurations. You may need to replace it. The part number is FIX11741460. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Dryer Thermal Fuse
$17.44
In Stock

Common Problems and Symptoms for 1106012511

Viewing 3 of 3
Won’t Start
Fixed by these parts
Fixing
How to fix it
Timer Not Working
Fixed by these parts
Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Replacing the Lint Filter

Replacing the Lint Filter

Replacing the Dryer Lint Screen Filter

Replacing the Dryer Lint Screen Filter

Replacing the Washer D-Shaped Knob Insert

Replacing the Washer D-Shaped Knob Insert

Replacing the Control Knob

Replacing the Control Knob

Replacing the Dryer Push-to-Start Switch

Replacing the Dryer Push-to-Start Switch

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Fairfax, VA
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
35 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chris from Morgan City, LA
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old lint screen -torn at wire mesh
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
27 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bill from Farmington Hills, MI
Parts Used:
W11778253
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The old lint screen on the dryer was broken
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
Read less
24 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More