11097561120 Kenmore Dryer - Parts

The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.

This black actuator spring with white rubber tip is used for both dryer doors and washer lids.

This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches i...

If your dryer is making strange noises or shaking more than usual, the drum bearing ring might be worn out. This part supports the front of the drum and helps it spin smoothly and quietly. Replacing i...

This part converts your appliance from Natural Gas to Liquid Propane.

This thermostat kit helps regulate your dryer’s temperature by cycling the heating element on and off. It’s adjustable between 135°F and 155°F and reactivates the heat when the temperature drops by 20...

Hearing squealing or grinding from your dryer? The motor pulley might be the culprit. This part helps the drum spin by supporting the belt where it connects to the motor. It’s a genuine replacement an...

This part is used to start the dryer once you have selected a setting on the timer.

This seal comes with the adhesive backing.

This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...

This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel...

Metallic screw that is less than an inch long. Does not include the plastic washer.