Models > 11096561820 > Parts

11096561820 Kenmore Dryer - Parts

Jump to:

13 - 24 of 117
Keep searches simple, eg. "belt" or "pump".
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
In Stock
Order now and your part arrives by Mar 22
This black actuator spring with white rubber tip is used for both dryer doors and washer lids.
In Stock
Order now and your part arrives by Mar 22
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order now and your part arrives by Mar 22
This genuine OEM part is a lint trap housing seal for your dryer. This part is used to form an airtight seal at the back of the dryer drum and the lint duct. The foam seal is approximately 28 inches i...
In Stock
Order now and your part arrives by Mar 22
With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenh...
In Stock
Order now and your part arrives by Mar 22
If your dryer is making strange noises or shaking more than usual, the drum bearing ring might be worn out. This part supports the front of the drum and helps it spin smoothly and quietly. Replacing i...
In Stock
Order now and your part arrives by Mar 22
This thermostat kit helps regulate your dryer’s temperature by cycling the heating element on and off. It’s adjustable between 135°F and 155°F and reactivates the heat when the temperature drops by 20...
In Stock
Order now and your part arrives by Mar 22
Hearing squealing or grinding from your dryer? The motor pulley might be the culprit. This part helps the drum spin by supporting the belt where it connects to the motor. It’s a genuine replacement an...
In Stock
Order now and your part arrives by Mar 22
$16.75
This seal comes with the adhesive backing.
In Stock
Order now and your part arrives by Mar 22
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Order now and your part arrives by Mar 22
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel...
In Stock
Order now and your part arrives by Mar 22
$7.30
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Mar 22
13 - 24 of 117