11070022011 Kenmore Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Marsha from SEARCY, AR
- Parts Used:
- W10874409
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- Less than 15 mins
lint screen damaged . Orordered part but did not receive it. Instead received various parts to repair clothe washer.
Item not repaired as did not receive my order. I did call the company and they said they would credit my card. Neither they nor the company the wrong order came from seemed interested in my efforts to return the wrong order. I feel this incredibly wasteful,. I would not order from a company with this attitude
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Seneca, PA
- Parts Used:
- W10874409
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Side of lint filter (screen) cracked and broke off.
Pulled the old lint filter out and threw it in the trash. Slid the new filter in and it was all done. Doesn't take a genius to do this repair. My old dryer a sears/kenmore is over 40 years old and the lint filter fit perfect. (MF part number w10874409)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bernette from LONG BEACH, CA
- Parts Used:
- W10874409
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
handle on old dryer screen had broken off
Removed old screen. Placed in new screen.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marianne from OCALA, FL
- Parts Used:
- W10874409
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken
It fit like a glove. Just put it right in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rosemary from Ellicott City, MD
- Parts Used:
- WP3977456
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Starter would not stay on after pushing on
Followed video, very easy installation. Unfortunately, the new starter switch does not stay on either so we still have not resolved the problem.
Was this instruction helpful to you?
Thank you for voting!
on-off switch
took off the back part with nut driver removed switch assembly by pressing down with a little pressure and it snapped out the new was a little different but worked on installing this was an easy assembly. just do things in reverse when finished just plug in electric and push switch to turn on. very easy to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mo from Portland, OR
- Parts Used:
- WP3977456
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
clothes dryer wouldn't continue to run after push-to-start switch was released
Unplugged dryer. Removed control panel end caps, removed anchor screw at each end of control panel that had been covered by end cap. Tilted control panel up to access components on back side. Using tech sheet found inside contol panel, swapped motor relay with heater relay (they're identical). Plugged dryer back in, pushed start switch; dryer continued to run (problem identified). Unplugged dryer; replaced relays to original positions. Ordered new power relay (p/n 3405281). Installed new relay when it arrived, plugged dryer in, tested it. Dryer worked normally (problem fixed). Unplugged dryer, reinstalled control panel anchor screws and end caps. Plugged dryer back in. Dryer continues to work normally.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Bronx, NY
- Parts Used:
- W10874409
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace the lint filter
took out the old filter and put in the new lint filter...it was a snug fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- linda from South Lebanon, OH
- Parts Used:
- WP3977456
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
the drter would not start
since dryers are hard for me to determine. I used my OHMs meter to see that the Thermal Fuse was good. The door switch was good . The off on switch was bad.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LEE from BUTLER, TN
- Parts Used:
- WP3977456
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
push to start switch didnt work
removed access panel installed new switch reinstalled access panel
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melanie from Staples, MN
- Parts Used:
- W10874409
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
The lint screen was broken
I ordered a new lint screen to replace the old. I used the part #. They only had "similar" products, not one exactly like mine. When the new part arrived, I had to take IT apart and use part of the new with part of the old, to get a working lint screen. I was able to do it only because of my internal sense of mechanics...and I am proud to say I am a woman!
Was this instruction helpful to you?
Thank you for voting!