Models > HTDX100ED4WW > Instructions

HTDX100ED4WW Hotpoint Dryer - Instructions

Jump to:

All Instructions for the HTDX100ED4WW
106 - 120 of 341
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
victor from ST AUGUSTINE, FL
Parts Used:
WE18X25100
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
door filter
was no repair- removed filter from door and installed new filter into door. No tools required.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from GLADYS, VA
Parts Used:
WE1M659, WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The start push button and the timer knob were broken because of low quality parts.
These buttons are easy to fix. Just line them up with the D shaped shaft and push the buttons to get them to go on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from TAMPA, FL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The small clip in the Timer Knob was broken and the Knob would not turn the timer.
First I took the system apart which I did not have to do. However, by doing that I was able to figure out which parts make the timer run. Anyhow, you simply place the new timer knob on the small shaft and it worked like magic. It was very easy to do.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from BIRMINGHAM, AL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Timer knob stop working
Just took off old one installed new one. It came right on. Thanks
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rodney from BATESVILLE, IN
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
unable to select anything on the wash cycle selector
the original knob had cracked and I ordered a new one and replaced it, all is well, thank you
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christel from GREENACRES, FL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The timer knob was inoperable
Very simple: I looked up the part number for my timer knob, ordered it from this site and received it one day earlier than expected. I simply attached the knob, and my problem was over. I am very, very satisfied and happy with your immediate delivery of the ordered part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from CRAWFORDVILLE, FL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
knob broke
Just pushed on new one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cheryl from LIMA, OH
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken knob
Put the knob on and turned.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christine from ALLEN PARK, MI
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Knob broke and ordered a new one
Very easy fix since it was only the knob
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from LEONARDTOWN, MD
Parts Used:
WE1M652
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob fell off. Had a crack in it.
Opened the package. pushes the new knob on and voila it worked! It was very easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CAROLINE from SAN ANTONIO, TX
Parts Used:
WE1M652
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob broke
Very simple. Ordered the part. Received correct part and fit perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John C. from Cincinnati, OH
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The door handle was comming off had broken hook
I pulled the old handle off and pushed the new one on.
No problem at all.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Francisco from WEST COVINA, CA
Parts Used:
WE4M181
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
was not heating cheak parts select they recomended to purchaged the thermostat check vidio for installetion now working fine thanks
watched vidio from the site.just follow the instructions, And was able to fixed the problem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Forrest from Mays Landing, NJ
Parts Used:
WE14X25080
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Cracked air duct
Two screws under the dryer door then the top comes off.Then two screws hold the front on come out. 4 screws top is off and front is off the rest is no problem.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Laurel Springs, NJ
Parts Used:
WE03X29897
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
dryer belt snapped
Replaced it as one would. I took off the front facing and replaced the belt. It took a bit of searching to find the proper way to route the belt around the pulley.

It took a while since it was my first time and I wasn't sure what to take apart and what to leave intact.

If I were to do it again, it would take 30 minutes or less.
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the HTDX100ED4WW
106 - 120 of 341