NWSR483GB0WW Hotpoint Dryer - Parts

The lint chute assembly houses the lint filter and channels exhaust air from the drum to the blower wheel.

This part helps to keep the door closed while the machine is running.

This interlock switch is a genuine OEM part that can be used in a variety of appliances like dishwashers and dryers. The switch is also known as a belt switch and works as a simple on and off mechanis...

Sold individually.

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...

This is 39 inches long.

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.