DLB6850BCL Hotpoint Dryer - Parts
Jump to:
Keep searches simple, eg. "belt" or "pump".
This clip fits inside the control knobs for your laundry machines, and helps to securely fasten the knob to the shaft, which allows you to easily turn the knob to select the correct settings. This is ...
No Longer Available
$88.17
This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of th...
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
The lint filter and frame for your dryer traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint filter is cracked or clogged, or the dryer takes too long to dry...
No Longer Available
$18.69
This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
$16.51
The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
This front drum slide kit comes with two slides with the apppropriate mounting hardware.
No Longer Available
$31.03
This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
In Stock
Order within the next 1 hr and 8 mins and your part ships today!
This restring coil kit is used to replace the existing coil in a dryer's heating element.
No Longer Available
$32.09
With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in w...
In Stock
Order within the next 1 hr and 8 mins and your part ships today!