NVL333GB5CC Hotpoint Dryer - Parts

This part is used to start the dryer once you have selected a setting on the timer.

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.

Used to turn the drum.

Bearing Only. This part helps your appliance run as quietly as possible.

This kit comes with the rear bearing, shaft support, lubricant and other items required for the installation.

Sold individually. There are some dryers that require 2 per dryer. They attach to the outer-most sides of the bearing.

This bracket is used on the drum bearing.

This screw is sold individually. Size 8 - 18 x 0.31

This dryer solenoid kit comes with both the 2 and 3 wire coil valves.