Models > GEF331AS2 > Instructions

GEF331AS2 Gibson Dryer - Instructions

Jump to:

All Instructions for the GEF331AS2
106 - 120 of 556
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Pam from Borden, IN
Parts Used:
131553900
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Dryer stopped heating.
Called a repair co. Said it would be about a week before he came to the rural area my mom lives and he probably wouldn't have the part. He would order it after he determined the problem. So I went to your web site and ordered the item it said was 80% and two other parts just in case. He came and used the Heating Element Assembly and said it was a good thing we had it. He would have had to order it and come back probably a week later. THANK YOU!! WE needed the dryer repaired sooner and saved another service call. I am returning the other parts not used and you make it so easy to do. I plan on using your site again.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from Emporia, KS
Parts Used:
137513300
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Front drum guidesnubber ring was worn out
removed the top of dryer, pulled front panel back from drum and installed snubber(Front Drum guide).
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brooke from Brookline, MA
Parts Used:
131965300
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
broken knob
Thanks to Justin in Customer Service I was able to get the correct replacement knob. It arrived and I installed it in seconds flat. It works great and you'd never know it wasn't original.

Thanks.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from ROUND TOP, NY
Parts Used:
3204267
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
The thermostat had deteriorated and no heat
Had to loosen drum and move it forward to get at switch. Didn’t have to remove belt.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ann from WALLA WALLA, WA
Parts Used:
3204267
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
lack of heat
Remove top lid by pushing tab on either side with a putty knife. Disconnect the 2 wire carriages on right. Remove one
phillips head screw on each side that holds front panel to dryer body. Remove front panel by using flat head screwdriver to pry panel from body. Remove thermostat located on bottom right attached to front of motor on a plastic body by removing two phillips head screws. Disconnect wires and place on new part.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
robert from lake worth, FL
Parts Used:
137513300
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
clothes were getting stuck
after numerous holes put in my families clothes i looked on line and found "partselect.com". i ordered the front drum glide after seeing a similar story about the clothes being torn and getting caught and my family and i have our new dryer back!! yeah :<)
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharron from Portland, OR
Parts Used:
131873500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Knob
Took it out of the bag and put it on.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elizabeth from Mentor, OH
Parts Used:
131644700
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door handle broke and came off.
Simply popped it back into place, careful not to break the new handle.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Natalie from Logan, UT
Parts Used:
131873500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob was cracked
Just put on the new knob! Supper easy and it works great!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from Rome, NY
Parts Used:
131622202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
It got lost...
It was very, very simple... I just had to find two screws ( that were not included)...no problem...
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Corey from Lodi, WI
Parts Used:
131873500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced broken timer knob
Just pressed the knob on.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lawrence from Milwaukee, WI
Parts Used:
131873500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken knob
It was very easy, looked and found the right match and pulled off the broken one and pushed on the new one
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terrance from MENOMONIE, WI
Parts Used:
131644700
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
No problem
Just snap into place
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from Los Angeles, CA
Parts Used:
131965300
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
was using a pliers to turn the part without the knob on and off; just didn't cut it; my family told me about your website and it was EASY!
just put it on in 5 seconds!
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
TJ from SCOTT DEPOT, WV
Parts Used:
131658800
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Door catch broken
Popped in the new door catch! Tightened the hinge screws( which work loose and allow the door to droop. The reason the catch broke!) Also put red Loctite on the screws in an attempt to keep them from backing out again! Working great so far!!!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GEF331AS2
106 - 120 of 556