EED4500D0WW General Electric Dryer - Parts

This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This wheel attaches to the motor.

Also known as Drum Mounting Hub.

This thermostat is located on the blower wheel.

There is a slot in it for a ground strap.

Screws NOT included.