DDG8288VJC General Electric Dryer - Parts

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

Also known as Flame Sensor/Detector.

This dryer drum belt goes around the dryer drum and the pulleys to rotate the drum once motor is activate.