DDG7200NG General Electric Dryer - Parts

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

The lint filter and frame for your dryer traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint filter is cracked or clogged, or the dryer takes too long to dry...

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

This wheel attaches to the motor.

This knob accepts a D-shaped shaft.

At just under three inches, this metal spring fits onto the arm of the idler pulley assembly of many of GE's clothes dryers. It provides for the tension needed in the belt by keeping the idler snug and stable.