Models > GDM1380T*429 > Instructions

GDM1380T*429 General Electric Dryer - Instructions

Jump to:

All Instructions for the GDM1380T*429

Customer:: Michael from Hopatcong, NJ
Parts Used:: WE25M40
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Loud screeching noise

I watched video supplied from parts select, only took about 30 minutes, hardest part was putting belt back on, couldn't fit hands in easily, but once I did it, dryer is like new, can't hear a thing.

Was this instruction helpful to you?

Customer:: Michell from Bellefontaine, OH
Parts Used:: WE25M40
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins

Loud Sqeaking noise

the replacement part was easy to replace but remembering how the belt went back on took alittle more time..

Was this instruction helpful to you?

Customer:: Peter from Sidney, NY
Parts Used:: WE11M23
Difficulty Level:: Easy
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers

heating element went bad

Took the dryer apart in an adjacent unused bedroom. Saw that the element was bad. Ordered new part from Part Select and installed when it arrived. The whole situation went as smooth as could be.

Was this instruction helpful to you?

Customer:: David from Oregon, OH
Parts Used:: WE25M40
Difficulty Level:: Easy
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers

Loud Squeek When Started until warmed-up

Ordered the recommended parts on-line and they showed up the next day. I followed the on-line repair video that described it all step-by-step.

Was this instruction helpful to you?

Customer:: Dennis G from Naples, FL
Parts Used:: WE25M40
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Holes were not threaded on rear bearing kit

Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.

Was this instruction helpful to you?

All Instructions for the GDM1380T*429