PSXH43EV2WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Linda from Apache Junction, AZ
- Parts Used:
- 131264905
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The timer knob broke
When the new knob came I just lined it up, the flat side of the stem with the flat side of the button and then just pushed it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rachel from Memphis, TN
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Dryer Starter Knob
I pulled off the broken knob and black fitter that was originally on the plastic piece. I didn't even need pliers. Then I replaced the new rotary knob under 5 seconds. Now the dryer works like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harry from San Diego, CA
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob was broken
Not much needed to replace a broken knob. I was very impressed with the fast service and will recommend Partselect to my friends.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LINDA from LONGWOOD, FL
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
need knob
buy need knob
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shannon from San Juan Capistrano, CA
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Broken rotary knob
Easy peasy! It is as easy as lining up the knob with the D shaft on the dryer. There is a small piece/ring around the shaft that can still be stuck up inside so if you can't get the knob to sit flush with the dryer, peak inside and slide it off with a pair of pliers (the repair video shows this clearly if you need an example). I was done in 2 minutes, including the time it took to open the package!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- August from Las Cruces, NM
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Start knob broke
Pulled the old knob off to get part number. Ordered replacement part. When it arrived, I pushed the new knob on the shaft. It ain't rocket science! Thanks for you quick, efficient service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DIANE*HUMPAL from CADOTT, WI
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knob broke
I ordered a new knob, delivery was fast, and it slipped right on. Works perfect! Thanks, Diane
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rene from Bell Gardens, CA
- Parts Used:
- 5303281153
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Loud Squeaking
Very simple. Pop the top open released the beld from the back it's easier that way the video was very helpful the sound was so bad you can hear it from a few houses down after year of just using it like that I figured I ha d nothing to loose great price great instructions now it sounds just as new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from South Lyon, MI
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dryer starter knob broke
put new knob on the shaft, took less than 5 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Ringgold, GA
- Parts Used:
- 5303281153
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Really Loud Squeeking Sound
I watched the videos on this excellent website first. Then the repair was a breeze.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marilyn from Renton, WA
- Parts Used:
- 131965300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The knob broke
I unplugged the 110 on the dryer, then popped the top on the dryer (with a screw driver), held the switch in place, bent the brass fittings to clamp the switch assembly to the front of the dryer panel and installed the knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Roscoe, IL
- Parts Used:
- 5303281153
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Scraping noise at rear of drum
Watched video on you tube went to PartSelect web site determined it was the rear bearing from the probable causes listed. Received part in two days and the job took less than thirty minutes. The limited access to the belt motor was the only difficult part of the job but by putting the belt on the idler pulley first and pulling down on the belt I was able to get it over the motor pulley. Thanks PartSelect for making this job easier than I thought it would be.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amy from salem, OR
- Parts Used:
- 5303281153, 5303281153
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The Rear drum bearing kit had sheared off
Exactly how the video showed! It was super easy and I am a girl...although I am a lil more mechanicly inclined than most girls, it was a piece of cake!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barry from Hazleton, PA
- Parts Used:
- 5303281153
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Loud squeal when dryer was running.
First I have to say that this was the fourth appliance repair I've done with Partselect parts. I am very pleased with all parts I've gotten from Partselect. The things I've ordered here are delivered quickly and are correct. Now for the dryer repair. I guess the most important tool I had to complete the job was the excellent video demonstration on the Partselect web site. I found that by following the instructions on the video even I had no problems. I spent more time cleaning the inside of the dryer than I did on installing the rear drum bearing. I probably saved us several hundred dollars by making the repair myself. At first I was intimidated but after I got the top off of the dryer and the front off the repair was simple and straightforward. Total time of repair was about fifteen minutes. Total time spent cleaning the lint and other stuff (I did find two dimes and a penny) was about forty five minutes. One hour total and my wife and I have a dryer which is acting like it did when we purchased it in 2001. Thanks to Partselect. Barry
Was this instruction helpful to you?
Thank you for voting!