Models > GTMP280ED4WW > Instructions

GTMP280ED4WW General Electric Dryer - Instructions

Jump to:

All Instructions for the GTMP280ED4WW
46 - 60 of 195
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Sharon from FARMERVILLE, LA
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Timer Knob
Very repair just put new on and it worked great
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christel from GREENACRES, FL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The timer knob was inoperable
Very simple: I looked up the part number for my timer knob, ordered it from this site and received it one day earlier than expected. I simply attached the knob, and my problem was over. I am very, very satisfied and happy with your immediate delivery of the ordered part.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from TAMPA, FL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The small clip in the Timer Knob was broken and the Knob would not turn the timer.
First I took the system apart which I did not have to do. However, by doing that I was able to figure out which parts make the timer run. Anyhow, you simply place the new timer knob on the small shaft and it worked like magic. It was very easy to do.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chris from WACO, TX
Parts Used:
WE2M302
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Reversing the dryer door.
Removed 4 #1 Philips screws from 1side and add to the other side.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dorothy from LACYGNE, KS
Parts Used:
WE01X20378
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
knobs cracked
Push on. But one pushed in panel
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anna from LELAND, NC
Parts Used:
WE01X20378
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
The dryer would not turn on.
We took the knob off of the machine and it appeared to be cracked on the inside. We ordered a new one and received it in 2 days. We matched the inside of the new knob to the stem coming out of the machine and placed the knob on the stem. The machine was fixed and we were happy! Thanks Part Select.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cheryl from WILDER, KY
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Door handle broke
Called my son-in-law. Easy as pie
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Darryl from FARR WEST, UT
Parts Used:
WE17X22217
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Bad dryer motor
Replaced dryer motor which was a perfect fit thanks to your help. The process was helped by the internet videos available for the step by step procedure of taking the dryer apart and replacing the bad motor. I also was able to completely clean the inside of the dryer thoroughly, and reassemble it back together .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Danny from DOVER, AR
Parts Used:
WE01X20419
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
broken dryer door handle
removed remaining handle pieces and simply snapped the new part in place. very simple,very easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from BIRMINGHAM, AL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Timer knob stop working
Just took off old one installed new one. It came right on. Thanks
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffry from ROCKVILLE, MD
Parts Used:
WE05X20431
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Burnt out bulb
Used a flash light to see, reached in and installed new bulb above the door
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from HAWLEY, PA
Parts Used:
WE01X20419
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Door handle broke
Snap off and then snap New one on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tessie from SOUTHINGTON, CT
Parts Used:
WE01X20378
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Control Knob was not working dryer wasn't turn on
Received the new Knob in a couple of days, inserted in the machine and work perfectly. No tools were necessary.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from LEONARDTOWN, MD
Parts Used:
WE1M652
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Timer knob fell off. Had a crack in it.
Opened the package. pushes the new knob on and voila it worked! It was very easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Claudia from GILBERTSVILLE, PA
Parts Used:
WE1M659
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Actually, it was the timer snob.
Just slid right on.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTMP280ED4WW
46 - 60 of 195