Models > GMMP280ED5WS > Instructions

GMMP280ED5WS General Electric Dryer - Instructions

Jump to:

All Instructions for the GMMP280ED5WS
106 - 120 of 149
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kelley from College Station, TX
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken dryer handle
The part arrived 24 hours after I placed the orer, even with the standard shipping. I just popped it in and problem solved.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carlos from Saint Albans, NY
Parts Used:
WE05X20431
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Blown bulb
Replaced bulb.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lucille from Flatwoods,, KY
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
door handle broke off
The repair was simple, the old one broke off and, the new one fit to a tee. Thanks Parts select.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Pascagoula, MS
Parts Used:
WE05X20431
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace light bulb in drum.
Unplug dryer, unscrew bulb then replace with a new bulb. Plug dryer back in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tarleton from Newport, RI
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Original handle on dryer door broke off
Aligned new handle with slots in dryer door and snapped into place. It took 5 seconds.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stu from Allentown, NJ
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
original dryer handle broke after 12 years
New handle popped on easily. After 2 weeks the replacement handle just broke.
Was this instruction helpful to you?
Thank you for voting!
Customer:
wm from oreland, PA
Parts Used:
WE04X20089
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
My Dryer Knob
Order online with my model number looked at picture of my dryer online order the part that I needed and 2 days later came via mail 15 mins around 50 bucks savings of 150 at least
Was this instruction helpful to you?
Thank you for voting!
Customer:
Maureen from Canastota, NY
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
plastic door handle broke off
super simple-snapped new handle right in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harold from Paoli, IN
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken door handle
Snapped it in place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Newport, AL
Parts Used:
WE49X22295
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Rusty door
Removing the old door was the problem as the old screws were rusty. Then, because we are not very spatially adept, we had trouble putting the door back together with correct hinge alignment. This should have taken about an hour and the part was perfect. The dryer, which we were going to throw away, looks and works perfectly! Parts Select offers great, timely service.
Was this instruction helpful to you?
Thank you for voting!
Customer:
phillip from denver, CO
Parts Used:
WE01X20419
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
none
Snap in place
Was this instruction helpful to you?
Thank you for voting!
Customer:
JoAnn from Daytona Beach, FL
Parts Used:
WD21X10261
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Would Not Start
Put part in. Put the door cover on & turned on & it worked. Thanks for having the part. So far, so good.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Howard A. from Little Elm, TX
Parts Used:
WD21X10261
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dishwasher would not start
Took the back off/there were six phillips head screws. Took the protective cover off the Interlock Switches and found the problem. One of the buttons was jambed and would not move. I pulled the switch up and pulled the connecting wires. This took a little bit of doing as the connectors have been set for over 8 years. I used a pair of needle nose pliers. I reconnected the new switch and punched both switches and the washer started. It was an easy repair after that, putting everything back in reverse order.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cyrus from Crofton, MD
Parts Used:
WE04X20089
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Timer knob/timer not functioning properly
Looked on the internet for video of how to do the repair and then did the repair replacing the timer and the control knob. It took about 25 minutes. It works like new.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ray from Maplewood, MN
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
plastic door handle broke
The service was prompt and efficient. When the door handle arrived it was very simple to attached. it snapped right into place that was it. It took just a few moments.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GMMP280ED5WS
106 - 120 of 149