Models > CDL3000R*478 > Instructions

CDL3000R*478 General Electric Dryer - Instructions

Jump to:

All Instructions for the CDL3000R*478
91 - 105 of 351
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kevin from Collegeville, PA
Parts Used:
WE4X795
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
the timer on an older gas dryer wasn't working properly
I removed 2 screws to remove the top control panel the 5 sheet metal screws to remove the back of panel to expose to timer control switch unpluging the power leads to replace the switch' the repair saved me about $ 400.00. My wife had me looking at replacing the Dryer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jay from Niceville, FL
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Plastic tab broke on handle --- temp taped on.
My daughter, who has the dryer in Florida, made the repair herself. She removed the broken handle that had been temporarily taped in place. Cleaned off tape residue with Goo-Gone. Then took the new handle and snapped it into place. Worked just like it was supposed to.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from OLD TOWN, FL
Parts Used:
WD21X10261
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No power to dishwasher
Replace both micro switches.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jimmie from Surprise, AZ
Parts Used:
7C7
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bulb burned out.
Screwed new bulb in socket
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from HAZELHURST, WI
Parts Used:
7C7
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The light bulb in my freezer door burned out.
Remove the burned out bulb and install the new light bulb.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rodney from BATESVILLE, IN
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
unable to select anything on the wash cycle selector
the original knob had cracked and I ordered a new one and replaced it, all is well, thank you
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CHRISTOPHER from PHENIX CITY, AL
Parts Used:
WE1X1192
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
I broke the door strike on the dryer.
Wife was out of town, visiting family. I broke the door strike by wedging the dryer door between the laundry room door, closed the laundry room door and it snapped the door strike breaking it. I ordered the part, and it shipped fast using the standard shipping, nothing fancy. Grabbed a pair of pliers and pushed the new door strike into place. It snapped right in, fits and works perfect like nothing ever happened. The wife will never know :)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christine from ALLEN PARK, MI
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Knob broke and ordered a new one
Very easy fix since it was only the knob
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CAROLINE from SAN ANTONIO, TX
Parts Used:
WE1M652
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob broke
Very simple. Ordered the part. Received correct part and fit perfectly.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from CRAWFORDVILLE, FL
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
knob broke
Just pushed on new one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from DOUGLAS, WY
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replace knob
No brainer
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charlie from KILGORE, TX
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The old dryer knob broke
I took off the old dryer knob and put on the new one
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary Ann from Buzzards Bay, MA
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Timer was stripped
Just placed it where it belonged.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cheryl from LIMA, OH
Parts Used:
WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken knob
Put the knob on and turned.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from BELFORD, NJ
Parts Used:
WE4M415
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Switch not working.
Open the door and removed the part. Installed the new part and started the dryer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CDL3000R*478
91 - 105 of 351