Models > UPSR485ED1WW > Parts

UPSR485ED1WW General Electric Dryer - Parts

Jump to:

25 - 36 of 98
Keep searches simple, eg. "belt" or "pump".
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
In Stock
Order now and your part arrives by Nov 22
Nut
$17.44
This fastening nut secures components firmly in place, helping maintain proper alignment and safe operation. It is commonly used as a replacement when original hardware is stripped, lost, or damaged.
In Stock
Order now and your part arrives by Nov 22
This refrigerator reversible door plug covers an unused mounting hole. It snaps into the opening left when door hardware moves to the opposite side, giving the door a neat, finished appearance. The pl...
In Stock
Order now and your part arrives by Nov 22
$181.32
Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.
In Stock
Order now and your part arrives by Nov 22
$137.14
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Special Order
$39.63
In Stock
Order now and your part arrives by Nov 22
This wheel attaches to the motor.
In Stock
Order now and your part arrives by Nov 22
$52.71
Also known as Drum Mounting Hub.
In Stock
Order now and your part arrives by Nov 22
$16.35
In Stock
Order now and your part arrives by Nov 22
This thermostat is located on the blower wheel.
In Stock
Order now and your part arrives by Nov 22
$18.54
In Stock
Order now and your part arrives by Nov 22
There is a slot in it for a ground strap.
In Stock
Order now and your part arrives by Nov 22
25 - 36 of 98