Models > DG09-US1 > Parts

DG09-US1 General Electric Dryer - Parts

Jump to:

25 - 36 of 115
Keep searches simple, eg. "belt" or "pump".
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
In Stock
Order now and your part arrives by Nov 28
Nut
$17.44
This fastening nut secures components firmly in place, helping maintain proper alignment and safe operation. It is commonly used as a replacement when original hardware is stripped, lost, or damaged.
In Stock
Order now and your part arrives by Nov 28
This refrigerator reversible door plug covers an unused mounting hole. It snaps into the opening left when door hardware moves to the opposite side, giving the door a neat, finished appearance. The pl...
In Stock
Order now and your part arrives by Nov 28
This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
In Stock
Order now and your part arrives by Nov 28
$181.32
Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.
In Stock
Order now and your part arrives by Nov 28
$39.63
In Stock
Order now and your part arrives by Nov 28
Also known as Flame Sensor/Detector.
In Stock
Order now and your part arrives by Nov 28
In Stock
Order now and your part arrives by Nov 28
This hi-limit thermostat acts as as safety mechanism that keeps the dryer from overheating.
In Stock
Order now and your part arrives by Nov 28
This wheel attaches to the motor.
In Stock
Order now and your part arrives by Nov 28
$16.35
In Stock
Order now and your part arrives by Nov 28
This thermostat is located on the blower wheel.
In Stock
Order now and your part arrives by Nov 28
25 - 36 of 115